You don't think about earthing.
Until you need to.

Solar plants generate high-voltage direct current (up to 1,000V DC) outdoors on your roof.

Effective earthing serves two non-negotiable functions:

1. Equipment Protection: It safely discharges lightning and switching surges into the ground, protecting expensive inverters and panels from catastrophic burnout.
2. Life Safety: It prevents touch voltages on metallic module frames and structure columns that could electrocute residents or maintenance technicians.

Modern grid-tied solar inverters are transformerless and continuously monitor the insulation resistance between DC conductors and the earth ground.

When earth pit resistance rises above safe thresholds (due to dried soil or leached chemical salts), the inverter detects an electrical hazard and shuts down with errors like "PV Isolation Low", "Ground Fault", or "Grid Fault". Your plant stops generating power entirely during the sunniest hours until the ground path is restored.

Earth pits rely on moisture and conductive mineral compounds surrounding the electrode pipe. In Maharashtra's climate, extreme summer heat bakes the earth dry, dramatically increasing soil resistivity.

During monsoon, torrential downpours wash away conductive mineral salts. Additionally, atmospheric oxygen and moisture cause verdigris corrosion on copper and GI strip terminals, loosening connections and creating high-resistance joints.

The service is a complete engineering restoration:

• Baseline Testing: Measuring resistance at each dedicated pit (DC, AC, and Lightning Arrester) using a digital 3-point earth tester.
• Chamber Clearing: Excavating mud, leaves, and debris from the pit chamber.
• Compound Replenishment: Adding certified moisture-retention chemical compound / bentonite compliant with IS 3043 / IEEE 80 standards.
• Terminal De-Oxidation & Torquing: Cleaning corrosion off copper/GI strips and torquing clamps with calibrated torque tools.
• Soaking & Re-Verification: Water soaking and re-measuring resistance to certify it is under 5 Ohms.
• Digital Report on Zenith: Timestamped photos and measured Ohm certificate uploaded to your portal.

The MRP for Earthing Top-Up is ₹2,499.

• Registered Plant Owners: Receive a ₹500 Loyalty Discount, making the standard price ₹1,999.
• SolarSaathi Members: Receive the ₹500 Loyalty Discount plus an additional ₹1,000 SolarSaathi Discount, bringing the final price down to just ₹999 (saving ₹1,500 total off MRP).

Our on-ground physical earthing services are active in Bavdhan, Kothrud, Warje, Karvenagar, and Erandwane.

We are actively expanding across Pune. Note: SolarSaathi digital care and inverter monitoring is available across all of Pune.

According to Indian Standards (IS 3043) and Central Electricity Authority (CEA) guidelines, electrical earthing resistance must be strictly below 5 Ohms, and ideally below 2 Ohms for sensitive micro-electronic solar inverters and lightning arresters.

In Indian conditions, earth pits should be inspected twice a year—post-monsoon and pre-summer. A chemical compound replenishment is typically required every 12 to 18 months to maintain low soil resistance.

Yes. Most OEM manufacturers (including Sungrow, Growatt, Solis, Sofar, Havells, etc.) explicitly exclude warranty coverage for failures caused by external grid surges, lightning strikes, or lack of compliant grounding (< 5Ω). Regular earthing top-ups protect your multi-year warranty.

An Earthing Top-Up typically takes 1.5 to 2.5 hours for residential and society systems (typically 2 to 3 earth pits). The technician requires access to the ground/pit location and access to a water tap for soaking the compound.